User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
84/144
MxEasy User Manual: Using MxEasy
3.9.2 Answering Ringing With Intercom
If, as described in Section 2.2.3, MxEasy was set up as a remote station for an IP Video Door
Station and someone rings the doorbell, then a bell icon is shown in the door camera's
live image in the main window and the Pickup phone button pulses in the left toolbar.
1. Click on the Pickup phone button to start two-way communication with the Door
Station. The voice connection with the Door Station is activated. Click on the Hangup
phone button to exit. The voice connection with the Door Station is terminated.
2. If you do not want to have any contact with the visitor, click on the Hangup phone
button without accepting the call. This interrupts the acoustic and visual signal without
establishing a voice connection.
The volume of the voice connection can be changed using the +/- slider. This requires your
computer to have a microphone and speaker.
You can adjust standard behaviors. To do this, open the “Behavior“ tab under Tools | Preferences
and change the settings for doorbell notifications as you like.
3.9.3 Opening The Door And Switching On The Light
You can use MxEasy to open the front door and switch the door light on and o. The Door
Station must be properly installed and configured for both of these functions to work.
1.
To open the door, click on the Door button. A system message opens. Click on Yes to
confirm. The door opener is activated.
2.
To switch the door light on and o, click on the Light button. The light icon is activated
at the upper left corner of the main window, and the door light is switched on. To
switch the light o, click again on the Light button.
3.9.4 Recording A Voice Mailbox Announcement And Listening To Voice Mailbox
Messages
Recording A Voice Mailbox Announcement
MxEasy makes it easy to record new voice mailbox announcements. To do this, open the
“Audio“ tab under Camera | Camera Options.
1. Click on Add to add an audio file from your computer as an announcement text.
2.
Click on Record to record an audio message. This requires that you have a microphone
connected. The “Record Audio Message“ window opens.
3.
Enter a name and click on Record. When you have finished speaking your message,
click on Stop and confirm with OK.
4. To listen to recorded messages, click on Playback.
5. Click on OK to confirm.