User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
82/144
MxEasy User Manual: Using MxEasy
• Area for counting line reports in a table: This area displays the reports for the period
of time of the selected profile. Line designations and designations for line limits (in
both directions) are assigned (automatically or manually) when the counting lines are
defined. These designations are shown in the counting lines report. You can show or
hide counting lines in the lower part of the reference image. The designations for line
limits are then also displayed on the counting lines in the image. This way, it is easy
to assign the counting lines to the values in the counting lines report.
• Camera reference image with heatmap: This area displays the heatmap for the
period of time of the selected profile. You can show and hide the display of the
heatmap and the legend for the heat map in the camera’s reference image.
The counting line and heat map evaluations can be called up in the event search or generated
regularly and automatically sent via e-mail. This way, you have the reports regularly at the
desired time intervals. See Section 4.5.6, “Generating Reports And Sending Automatically
Via E-Mail“
for additional information on generating and sending report profiles.
Furthermore, the counting line reports and heat maps can be directly exported from the
event search as HTML and CSV files or as a JPEG file and stored locally or to a storage device.
Click on Export... on the corresponding counting line or heat map profiles.