User manual

81
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
81/144
Using An IP Video Door Station
Evaluating movement data is explained in the following section. The necessary activation
and set up of MxAnalytics on a Q24M camera and the creation of predefined MxAnalytics
evaluations are outlined in Section 4.5.1, “Activating MxAnalytics And Configuring The Settings“
3.8.2 Calling Up Evaluations
You can call up the movement and counting line evaluations as daily heatmap reports or as
weekly and monthly counting lines reports. To do this, select heatmap/counting lines report
profiles. There are several predefined profiles available. Analysis of the data and its display
is performed according to the settings for the profile selected. You can also create custom
report profiles. For additional information on creating report profiles, see
Section 4.5.5,
“Customizing The Report Profiles Used For Analysis“
.
Calling Up Evaluations In The Recordings Browser
1. Open the Recordings Browser via the File| Browse Recordings menu.
2. Click on Sources and select the desired camera. Click on OK to confirm.
3.
Click on Search Mode and select the MxAnalytics Search Mode. Click on OK to confirm.
4. Select the desired profile in the Counting line profile and Heatmap profile selection
box. Days, periods of time and type of export (weekly, monthly) are specified in the
predefined report profiles.
5. The period of time in the selected profile can be adjusted by setting a reference
date. Activate the Set date checkbox and select the desired date. The current date is
automatically set as the reference date if no date is entered.
The movement data is analyzed and displayed according to the selected settings:
Properties bar to select
and setup profile and
time data
Area for dounting line
reports in a table
Camera reference
image with heat map
to display the heat
map and/or count-
ing lines