User manual

www.mobotix.com • sales@mobotix.com

70/144

MxEasy User Manual: Using MxEasy

1. Hover with your mouse over the Playback Speed rotary button and turn the button

with the mouse to the right or left until the desired speed is shown in the main window

(e.g., slow or fast forward or backward).

The selection immediately triggers the playback of event sequences.

Click on the playback or rewind button (depending on your previous selection) to stop

or to pause playback.

Furthermore, you can specify how the recorded event sequences should be played back.

This is done with clip mode. A clip contains the recording area that belongs to an event. This

is normally two seconds of pre-alarm time, the event image and the post-alarm time that

you speciﬁed when setting up the recording mode (see Section 3.5.2 “Automatic Recording

And Alarming, Setting The Recording Mode“).

During playback, you can select whether the clip for the current event sequence should

be played once or continuously. Alternatively, you can decide to play back all of the clips

for the found event sequences.

1. Open the shortcut menu via the Clip Replay Mode button and select the desired

clip mode.

If you see something during playback that you want to take a closer look at, you can switch

directly to single-step mode and examine the recordings image by image:

1. A recording is played back. Click on the Playback Speed rotary button. The rotary

button jumps back into output mode and single-step playback is activated.

Click on the playback or rewind button to play back the event images in single steps.

Special Function: Event Overview And Event Histogram With OnScreen Control

In Player Mode, you can search for events and look at events or event sequences by playing

them back. The OnScreen Control in Player mode provides you with another option to quickly

get an overview of all recorded events for one camera, see event frequency distribution

and summarize multiple events and event sequences for export.