User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
68/144
MxEasy User Manual: Using MxEasy
Searching All Recordings For Events
You can filter the recordings by event type to find the events that you are looking for as
quickly as possible:
1. Open the shortcut menu by clicking on the Filter Event button and select the desired
event types. The event filter is activated when you select one or more event types.
2. Navigate through the recorded events with the navigation buttons:
– First event and last (most recent) event: Use these buttons to jump to the first or
last image of the recordings that have been filtered. The relevant event is shown
in the main window.
–
Previous event and next event: These buttons proceed from the currently displayed
event image to the previous or next event image within the recordings limited by
the filter. The relevant event is shown in the main window.
Searching For Events Within A Time Range
If, for example, you have set up specific periods of continuous recording and would like to
check whether something happened during this period of time, you can limit your search
to these time ranges.
1. Click on the Search Area rotary button. “Search by time“ is activated. The navigation
buttons are displayed without lightning bolts.
2. Choose one of the following procedures:
• You would like to know whether something happened at a specific time, and if
so, what happened.