User manual

61
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
61/144
Recordings And Alarms
• O: No recordings. Choose this option if,for example, in case of an alarm, a notification
should be sent to you or another person, but should not trigger recording.
• Continuous recording: The camera records continuously.
• Event recording: Records when an event is triggered, such asmovement. You must
have selected at least one event for event recording.
Open the shortcut menu via the Recording Mode button and select the desire recording mode.
Hint: The corresponding recording mode is displayed on the left side of the upper informa-
tion bar, while the recording target is indicated in the lower information bar. If you hover
the mouse over an element, you will see tooltips that explain the recording status and
recording targets.
Note
A special advantage of MOBOTIX digital camera technology with integrated buers
is the recording of pre-alarm images. This means that when an event is recorded,
the two seconds before the actual event begins are also included in the recording.
S
electing Events
Select an event or the events that should trigger an alarm and lead to recording and/or
notification:
• Video motion sensor: Changes in the live image trigger alarms. Video motion windows
are used to detect these changes. You can choose from a predefined set of video
motion windows or define your own. To do this, open the shortcut menu by clicking
on the Video Motion Sensor button and choosing the desired option.
You can specify whether the video motion windows should be visible all the time or
only when an alarm is triggered with the
Always Show VM Windows and Show VM
Windows On Event
options.
Creating And Editing Custom Windows
Open the shortcut menu via the Video Motion Sensor button and select “Custom
Windows.“
–
Creating video motion windows: Use the mouse to draw a frame within the
camera image in the main window (see illustration).