User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
52/144
MxEasy User Manual: Using MxEasy
• Mounting position: You can set the mounting position of a MOBOTIX Hemispheric
camera (
Ceiling or Wall ) from the shortcut menu of this button. If ceiling mounting is
enabled, you can also specify the North direction of the camera. Activate the button
and turn the image to the right or left using the symbols that are displayed. The North
direction set in this manner will be saved automatically once you deactivate this button.
Adjusting the North direction also changes the Surround and Double Panorama
camera views. For additional information, see the section “First Images And The Most
Important Settings“ in the Q24M Camera Manual .
• Panorama installation: If a D14 Sec 180 is integrated in MxEasy, then the Panorama
Installation button will be shown instead of the Mounting Position button. This enables
setup of the panorama image for the D14 Sec 180. As for all dual models, the live image
of this camera consists of a combination of a right and left image, which are provided
by the camera’s right and left sensors. The D14 Sec 180 can produce a Panorama
view that stretches seamlessly over both images. Move the controls until both images
are positioned in such a way that the windows merge seamlessly. Clicking on the
Panorama Installation button ends the setup and saves the view.
Combine or move
both images away
from each other
(select both images)
The length of the bars
determines the subtlety
of the movement
Panning and tilting
the selected image
(select left or right
image)
Correcting the
camera’s imbalance
Zooming of
selected image
Selecting image
elements: left image,
both, right image
• Mounting correction: Corrects the pitch of a camera mounted to a wall. Activate the
button and correct the pitch by clicking on the icons that appear.
•
Panorama correction: If the Panorama view is not centered, this may cause trapezoid-
shaped distortion. Panorama correction enables this distortion to be adjusted so that
the selected image section looks as natural as possible. Activate the button and correct
the distortion by clicking on the icons that appear.
• Recorded image: This option is important for all cameras for which a zoomed section
of the live image (PTZ) is shown instead of the full camera image. Only this section will
be recorded when this kind of live image is recorded. You can avoid this by activating
the Recorded Image button. This guarantees that a full camera image is always
recorded - regardless of the live image that is visible or its settings.