User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
32/144
MxEasy User Manual: Installation And Initial Operation
Define Bells
Select which actions should be performed when a bell
is rung at the Door Station. Doorbell ringing can be
triggered by pressing one of the existing bell buttons
(camera, keypad or bell module) or by entering a
“contact number“ defined previously when training
in RFID cards on the keypad.
1.
Select the contact number (person) and/or bell for
which an action profile will be entered.
2.
Select whether a doorbell ring should be answered
– without ringing at the remote station (no
phone ring)
– only with ringing (ring only)
– with ringing and mailbox (ringing and visi
-
tors can leave messages if the homeowner
does not answer)
– with mailbox only (no ringing, visitors can
immediately leave messages)
– with announcement only for the visitor.
3. If the ringing and mailbox profile was previously selected:
– Now select the remote station or enter a new remote station that will indicate
when the doorbell at the Door Station is rung.
–
If you select MxEasy as Remote Station, the IP address of the computer on which
MxEasy runs must be entered or selected. For a Voice over IP call, either a SIP
number or an IP address for the VoIP telephone to be called must be entered or
selected, depending on the configuration. The SIP number is displayed as “*101“.
This is the name that was specified on the SIP server for the Grandstream models.
“*101“ is then resolved in the real IP address of the Grandstream.
–
Select how much time should elapse without the doorbell being answered before
a message should be played to the visitor.
– Select a message that should be played to the visitor.
– Activate the checkbox Record Message if the visitor should have the option of
leaving a message.
4. If the mailbox only profile was previously selected:
– Select a message that should be played to the visitor.
– Activate the checkbox Record Message if the visitor should have the option of
leaving a message.
5. Click on the Continue button. The door camera is reconfigured. The “Overview“
window opens.