User manual

29
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
29/144
Using MxEasy For The First Time
2.3.3 Special Case: Integrating An IP Video Door Station
MxEasy can also be used in combination with an IP video Door Station to use a PC as an
additional video two-way communication intercom and easily secure entrances. As a Door
Station you can use the standard T24 Door Station or the S15 FlexMount camera, which
can be configured as a Door Station. To make use of the Door Station-specific functions,
the IP Video Door Stations must first be integrated into MxEasy.
When you start MxEasy for the first time after connecting the door cameras, the MxEasy
Assistant automatically begins to search for new cameras and displays all cameras detected
in a list. This will include the T24 Door Station and the S15.
Selecting A Door Camera
1. Proceed as described in
Section 2.2.2 “Selecting And Connecting New Cameras .“
If the door camera (T24 or S15) is password-protected (status: Authentication re-
quired in the camera list) and you have not yet unlocked the camera directly in the
camera list, then the authentication window will now open.
Authenticate
1. Enter the user name and password and confirm by clicking on OK. The “Select
Integration with MxEasy“ window opens.
Select Integration with MxEasy
Typically, you will have already conducted an
automatic configuration at the T24 or the S15
before integrating the door camera into MxEasy
(see the T24 System Manual, Part 2, Initial Opera-
tion And Configuration). If this is the case, the
system will detect this automatically and open
the “Select Integration with MxEasy“ window
with the following option fields (see the image
at right). The Keep automatic configuration
settings option field is automatically selected.
1. Keep this setting.
2. Click on the Continue button. The “Con
-
figure Access Mode“ window opens.