User manual

27
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
27/144
Using MxEasy For The First Time
• Quick Start: The camera configurations are applied directly to the system, without
asking further questions, with the standard values for the MxEasy settings (e.g.,
for the Control Mode).
We recommend resetting the cameras to the MxEasy factory defaults, unless the cameras
were already configured on another computer using MxEasy. In this case, select the Quick
Start option. To reset to the factory defaults, select the Complete Integration option.
1. Click on the desired option field you would like to use.
2. Click on the Continue button. The “Configure Access Mode“ window opens.
Configure Access Mode
Set the control mode for the cameras and select the
bandwidth for transmission:
1. Choose the desired Control Mode you would
like to use.
2.
You can prevent accidental configuration changes
with the Control Mode. For example, a camera
integrated over the Internet can be set to Image
Mode to prevent accidental changes to the
recording type.
3. Select the Bandwidth.
The Bandwidth determines how, in environments
with connections of dierent speeds, images are
retrieved by the cameras and shown as live images
or provided for searching. Choosing a Bandwidth
enables you to determine the image quality for the cameras.
4. Click on the Continue button. The “Change Camera Access“ window opens.
Change Camera Access
Set the user name and a password for the cameras
to block public access to these cameras. Leave the
fields empty if you would like to skip this step. For
security reasons, however, we strongly recommend
setting a user name and a password.
1. Enter a user name and a password.
2. Repeat the password.
3. Click on the Continue button.
If you would like to set up a user name and password
at a later date, proceed as described in Section 4.1
“Setting Access Rights And Passwords“ .