User manual
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
26/144
MxEasy User Manual: Installation And Initial Operation
Change Camera Network Configuration
Choose one of the two configuration methods:
Get IP address automatically
If your computer automatically gets
its IP address from a DHCP server
(e.g., DSL router), then it also makes
sense for the camera to get its IP
address automatically.
1. To do this, select the option
Get IP address automatically.
Use a specific IP address
If you have assigned a static IP
address to your computer, you will
prefer to assign static IP addresses
(issued by your system administrator)
to every camera.
1. To do this, select the option
Use this IP address.
2. Enter the IP address and the
subnet mask.
3.
Click on OK. The cameras are
reconfigured and the “Select Integration with MxEasy“ window opens.
Select Integration With MxEasy
Choose whether and how the existing camera configurations
are applied in MxEasy. The following options are available:
•
Complete Integration: The camera configurations are
reset to the MxEasy factory defaults. The Wizard helps
you to choose the other MxEasy settings. The settings
can be restored as needed because a backup copy
of the camera configuration is saved for every camera
integration.
• Limited Integration: The camera configurations are
retained. The Wizard helps you to choose the other
MxEasy settings, such as Control Mode and Bandwidth.