User manual

25
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
25/144
Using MxEasy For The First Time
2.3.2 Selecting And Integrating Cameras
Selecting Cameras
1.
Select the cameras you would like to connect:
To select more than one camera, simply use Shift KEY for a block selection or the
Command KEY and left-click for individual selection. Command-a selects all cameras.
Note: If you want to integrate several password-protected cameras (status: Authen-
tication required) at one time, you can add the cameras to the camera list via the
User & Password shortcut menu. This spares you the trouble of having to enter
access data several times.
Press Shift or the
Command key
to select more
than one
2. Click on the Continue button. The MxEasy security prompt window opens.
3. Confirm the security prompt by clicking on OK.
4. If some of the cameras are password-protected (status: Authentication
required in the camera list) and you have not yet unlocked the camera
directly in the camera list, then the authentication window will now open:
5. Enter the user name and password.
6. Click on OK to confirm.
If cameras that have the status (Invalid Network) were selected, the window
for network configuration will now open.
1. Confirm the prompt by clicking on OK. The “Change Camera Network
Configuration“ window opens.