User manual

19
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
19/144
Power Supply And Network Connection
2.1.2 Power Supply And Network Connection With A PoE Switch
1. Connect the factory pre-installed cable of the camera to the Ethernet PoE port of the
PoE switch/router. The switch/router must support the PoE standard IEEE 802.3af.
Patch cable
Patch
cable
192.168.1.12
(255.255.255.0)
10.8.0.99
PoE Switch/injector
IEEE 802.3af
The IP addresses
in the diagram
are shown only
as an example