User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
18/144
MxEasy User Manual: Installation And Initial Operation
2 INSTALLATION AND INITIAL OPERATION
2.1 Power Supply And Network Connection Of Cameras
MOBOTIX cameras can be supplied with power using a Network Power Adapter
(MX-NPA-PoE) or a switch that supports the PoE standard IEE 802.3af. Both of these
methods will be briefly described here. For information about additional power supply options
and for more details, see Section Network And Power Connection in the corresponding
camera manual.
2.1.1 Power Supply When Connected Directly To A Computer
1. Connect the pre-installed cable of the camera to the Camera connector of the
Network Power Adapter.
2. Connect the PC/Power connector of the Network Power Adapter to the Ethernet
port of the computer.
3. Plug the RJ45 connector of the external power unit into the LAN/Power connector
of the Network Power Adapter.
NPA PoE Set
PC/Power
LAN/Power
Camera
Patch cable
Patch
cable
192.168.1.12
(255.255.255.0)
10.8.0.99
Use the new blue
MX-NPA PoE set
for the Q24, M24,
D24, D14 and T24, as
previous MOBOTIX
network power
accessories such
as the NPA Set,
Power Box and Power
Rack (MX-NPA-
Set, MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with these models
The IP addresses
in the diagram
are shown only
as an example