User manual

113
© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
113/144
Configuring an IP Video Door Station
4.6 Configuring An IP Video Door Station
The settings on the door camera are usually configured when the door camera is integrated
with the MxEasy Wizard. This can also be adjusted later, of course. The doorbell behavior
and the door station hardware can be configured in the Door Station Options. You open
the Door Station Options by opening the Camera| Door Station options menu or clicking
on the Door Stations options button.
4.6.1 Configuring Door Station Options
Changing Doorbell Behavior For Remote Stations
Here you can set and change the doorbell behavior for every individual and already integrated
remote station (iOS device iPad/iPhone/iPod touch, PC with MxEasy and IP video phone).
Note: When an iOS device connects with a door station for the first time (by integrating the
door station to the MOBOTIX App), the door station registers the device as a remote station.
It is then available as a remote station in MxEasy.
1. Select the “Doorbell“ tab.
2. Select the contact number and/or bell for which an action profile will be entered.
3. Select whether and how a doorbell ring at the Door Station
should be answered:
– Without ringing at the remote station
The remote station does not respond; residents are
therefore not informed of the ringing doorbell.
–
With a ringing and a message for visitors if the resident
does not answer
The resident is informed of the ringing doorbell. If the
homeowner does not respond after a specified period
of time, then a message is played at the Door Station
and the visitor can leave a message.
– Only with a message for the visitor
If a visitor rings the doorbell at the Door Station, then a
message is played and the visitor can leave a message.
4. If the ringing and message profile was previously selected:
– Now select a remote station or enter a new remote station that will indicate when
the doorbell at the Door Station is rung.
If you select MxEasy as remote station, the IP address of the computer on which
MxEasy runs must be entered or selected. For a Voice over IP call, either a SIP
number or an IP address for the VoIP telephone to be called must be entered or
selected, depending on the configuration.
– Select how much time should elapse without the doorbell being answered before
a message should be played to the visitor.
– Select a message that should be played to the visitor.