User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
104/144
MxEasy User Manual: System Configuration
Doorbell Notification
These options refer exclusively to the T24 Door Stations
• Automatically show ringing camera in main view: When this option is activated, the
live image of a door camera is automatically shown in the main window whenever
a visitor rings the doorbell at the Door Station.
• Restore application if minimized: If this option is activated, the minimized program
window is restored when a visitor rings the doorbell at the Door Station.
• Show red chime on doorbell: If this option is activated and the doorbell is rung on
the Door Station, a flashing red chime appears. You can deactivate the chime by
clicking on it.
• Play sound on doorbell: When this option is activated and a visitor rings the doorbell
on the Door Station, the selected alarm sound will be played. The bell sound ends
when two-way intercom communication begins.
Camera Sequencer
• Camera Sequencer Interval: When the camera sequencer is activated, you can use
the sequencer interval to define how long the display will last before switching to the
image of the next camera.
4.4.4 Setting Intercom Mode
If a camera that supports the Echo Cancellation is
integrated in MxEasy, you can choose between several
sound modes to adjust the audio quality for two-way
communication. For that, you may have to activate the
Echo Cancellation checkbox first (on the „Audio“ tab
in the Camera | Camera Options menu). By default,
the echo cancellation is activated in T24 Door Station
cameras and therefore, it does not need to be activated
in MxEasy afterwards.
•
The standard setting is the Hands-free talking mode.
The sound settings cannot be adjusted in this mode.
• In the Headset mode, you can adjust the sound
settings.
• In very noisy environments you can switch to one-
way communication by selecting the Limited mode.