User manual

© MOBOTIX AG • Security Vision Systems • Made in Germany
www.mobotix.com • [e-mail]
102/144
MxEasy User Manual: System Configuration
4.4 Adjusting The Default Program Settings
To adjust the default program settings, open the Settings window via the Tools | Preferences
menu.
4.4.1 General Settings
• Language: Language of the MxEasy user interface.
• Automatic Authentication: When MxEasy launches,
an automatic user login occurs at the selected access
level, without a password prompt. See also Section 4.1.1
“Defining Access Rights For MxEasy.“
• Folder for snapshots: Directory or folder for storing
images taken with the Snapshot button.
• OpenGL/Hardware Acceleration: The hard-
ware acceleration option for high-performance
graphic displays can cause problems in some graph-
ics cards.
• Restore hidden messages: Message and warning
windows that have been hidden by selecting Don’t
ask me again are shown again.
Note
MxEasy will warn you if an error occurs when recording data to a storage medium. This
error message can be hidden by selecting Don’t ask me again .
4.4.2 Setting Connections
• Proxy Server: If you do not want to use the system’s
proxy settings, meaning that you do not want to use
the same settings for the cameras and for the system,
enter proxy settings for the cameras in the program
settings. These settings are done for each environment.
• Bypass Proxy Settings: If a proxy server has been
entered, access to all network devices will occur over
this server even if the device is a remote camera or a
local network camera. This may result in slower access
to the local camera or even prevent access entirely.
You should therefore enter the IP addresses (or symbolic
names) of all local network devices in the Bypass proxy
settings field. Here, you can enter an address range
(e.g., 192.168.* ) or multiple addresses separated by
semicolons (192.168.1.23;192.168.1.24). These settings are also done for
each environment.