Datasheet
www.mobotix.com
14
T24
T24: Build A Network Quickly, Easily And Cost Eectively
What does a typical system look like and what kind of cabling is needed? The system
image shows the schematic structure of an access control system with the T24 including
the Hemispheric camera, keyless entry, info module and an additional security door opener
from MOBOTIX for inside installation next to the door. The T24 network connection and
power supply are supplied via an Ethernet cable (PoE technology) or alternatively using
the Mx2wire expansion set via a two-wire bell wire. This way, the existing doorbell or
simple door intercom system can be replaced by a versatile access control system with
a high-resolution MOBOTIX door camera with little extra eort or cost.
&
First-time installa-
tion: CAT cable
Renovation/reconstruc-
tion: bell wire + Mx2wire
Code and RFID module
Keyless entry
Info module & Mx2wire
Two-wire connection
Hemispheric camera
Speaker & microphone
Door switch
12V, 12W
Door lock
contact
Mute
Open door
Light
Security door opener
Doorbell, battery & codes
Mx2wire module
Data & power
Two wires (e.g., bell wire)
Data & power (PoE)
CAT cable (e.g., CAT7)
Data & power (PoE)
MxBus (two wires)
Battery supply & access codes
PoE switch
PoE switch
Remote station
Optional
– OR –
Fast, Simple Installation
In new constructions, MOBOTIX recommends connecting a CAT7 cable directly to the door station.
In renovations of older buildings, the existing bell wires can be used further together with the
Mx2wire technology (also with Siedle Vario).
Simple Installation – System Overview