Spec Sheet

MOBOTIX AG • www.mobotix.com • 10/2018
Technical specifications subject to change without notice
Technical Specifications
MOBOTIX NAS Network Attached Storage Devices
Network recording for ONVIF-S cameras and decentralized MOBOTIX cameras in 3 variants (8/16/32 channels)
A highly efficient complete solution with secure data storage from a single source, which now allows decentralized
and centralized video components to be easily combined. The numerous product advantages of the intelligent
MOBOTIX IoT cameras (such as MxAnalytics or MxActivitySensor) are completely retained, while each MxMC
workstation can now also be supplemented with the special functions of, for example, a mechanical HighSpeed
PTZ camera. Easy to realize without any programming effort!
MxManagementCenter 2.0 (and higher) and MOBOTIX NAS: Codec and camera-type dependent storage options
Video Codec
Type of
Camera
SD Card
Support
MOBOTIX NAS
(with MxMC Interface)
Third-Party NAS
(no MxMC Interface)
MxPEG+
MOBOTIX IoT
(Mx6 Series)
Yes
Yes (no limitation of the camera number)
Yes (no limitation of the camera number)
MJPEG
MOBOTIX IoT
(Mx6 Series)
Yes
Yes (no limitation of the camera number)
Yes(no limitation of the camera number)
MJPEG
MOBOTIX MOVE
No
Yes (8/16/32 cameras, depending on the NAS)
No (access via MxMC is not supported)
MJPEG
ONVIF-S Camera
(Third-Party)
No
Yes (8/16/32 cameras, depending on the NAS)
No (access via MxMC is not supported)
H.264*
MOBOTIX IoT
(Mx6 Series)
No
Yes (8/16/32 cameras, depending on the NAS)
No (access via MxMC is not supported)
H.264*
MOBOTIX MOVE
No
Yes (8/16/32 cameras, depending on the NAS)
No (access via MxMC is not supported)
H.264*
ONVIF-S Camera
(Third-Party)
No
Yes (8/16/32 cameras, depending on the NAS)
No (access via MxMC is not supported)
* H.264 is protected by patent, to use the codec at an MxMC workstation a MOBOTIX Integration Starter license is required