Specifications

91/1�61�6
Installing The Corner And Pole Mount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Installing The Corner And Pole Mount2.9
Mounting Instructions2.9.1
The Corner and Pole Mount is made from stainless steel and is extremely robust and
rustproof. It is used in combination with the Wall Mount described in section 2.8, in the
case that a Q24M is to be installed on a pole or building corner. The Wall Mount required
for complete installation must be ordered separately.
The mounting pole should have a diameter between
60 and 180 mm. Thanks to the 360° panorama view
from above, installing the camera on the corner of
a building makes it possible to monitor a range of
approximately 270° from one building wall to the other
(around the corner) with one single Q24M camera.
By design, the Corner and Pole Mount cannot be mounted
above a wall outlet for the camera cabling.
Corner And Pole Mount2.9.2
Item Quantity Part Name
6.1 1 Pole mount, stainless steel, white, powder-coated
6.2 4 Stainless steel Allen screws M6x20 mm
6.3 4 Stainless steel washers Ø 6 mm
6.4 4 Stainless steel lock nuts M6
6.5 2 Stainless steel straps
6.6 2 Cable fitting with counter nut and O-ring cord
6.7 4 Wood screws 6x80mm incl. screw anchors and washers
Width: 218 mm
Height: 130 mm
Depth: 92 mm