Specifications

88/1�61�6
Q24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Procedure2.8.3
Remove the camera housing: 1. Remove all four Allen
screws using the supplied Allen wrench and lift off the
outer shell. The screws and outer shell will be needed
again shortly.
Remove the camera mounting ring2. : Separate the
black mounting ring from the camera housing. This
ring is not required when mounting the camera to the
Wall Mount.
Sepa r a t e t he bot to m pla t e fo r m t h e Wa l l M o u n t : 3. The
bottom plate is used to hold the camera, and is only
attached and screwed into place during a later step.
Pass the camera cable up through the bottom of the 4.
bottom plate: Ensure the orientation is correct. The
spring clips should be on the underside of the bottom
plate.
Snap the camera into place on the bottom plate: 5. Firmly
push the camera into the Wall Mount. The plastic spring
clips will snap into place when the trapezoidal elements
on the rear of the camera housing exactly match up
with the corresponding openings on the Wall Mount.
Pay attention to the direction of the camera (OBEN /
TOP arrow pointing in the direction of the longer wall
for ceiling installation in rectangular rooms).