Specifications

83/1�61�6
Installing The Vandalism Set
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Mount the dome6. : Screw the dome on in a clockwise
direction using the supplied wrench. If required, clean
the dome gently using a soft cotton cloth before com-
pleting installation. Check the sharpness of the camera
image again, and correct it if necessary.
Mount the spacers7. : Place the four spacers on the
mounting ring.
Mount the stainless steel cover8. : Position the stainless
steel cover as shown and tighten the security screws
using the included two-hole driver bit.
4x
Lens wrench for
installing the dome
Spacers for
Vandalism set
Maximum torque for all
screws is 1 to 1.2 Nm
Security screw and
two-hole driver bit
Stainless steel cover
must be positioned
correctly to line up
with the LED openings