Specifications

76/1�61�6
Q24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Procedure2.6.3
Prepare the network connection1. : Run the network cable above the suspended
ceiling and ensure that enough cable slack is available.
Cut a hole for installation2. : Cut a round hole for cam-
era installation (e.g. with a 150 mm hole saw). Use the
supplied cutting template of the In-Ceiling Set (fold-out
at the end of the manual).
Remove the outer shell3. : Remove all four Allen screws
using the supplied Allen wrench and lift off the outer
shell.
Remove the mounting ring4. : Separate the mounting
ring from the camera housing. This ring is not required
when mounting the camera in the In-Ceiling Set.
Place the camera in the In-Ceiling Set5. : The dovetail
guides at the back of the camera housing fit exactly
into the openings of the In-Ceiling mounting ring.
Connect the cable6. : Connect the on-site network cable
to the camera network cable using a standard con-
nector.