Specifications

61/1�61�6
Mounting The Camera Without Accessories
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Required Tools2.4.2
Please check that all components supplied with the camera are present in the original
packaging first (see section 2.2).
The Following Additional Tools Are Required For Installation:
Any additional materials for fastening the camera to a ceiling/wall, if necessary •
– 4 wood screws incl. screw anchors and washers are included in the original
packaging.
Screwdriver•
Power drill• for screw anchor holes needed for ceiling/wall mounting
MOBOTIX • Drilling Templates (at the end of this manual)
Scissors• to cut out the template
Pen• to mark the drill holes
Materials and any tools needed to connect the pre-installed MOBOTIX network cable •
in the camera with the on-site network cable.
Wall outlet and tools• to install the outlet in the wall/ceiling (keyhole saw)
Soft cotton cloth• to clean the front of the lens
Q24M side view
incl. cable
Ideal cabling circum-
stances are provided
if the corresponding
hole depth (e.g. ush-
mounted wall outlet)
is at least 20 mm.