Specifications

40/1�61�6
Q24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
INSTALLATION2
The Q24M is primarily designed for installation on walls or ceilings. The supplied L11 180°
lens captures the entire room, practically from wall to wall and from floor to the ceiling.
See sections 2.4 and above. for the different installation options; drilling templates can
be found at the end of the manual.
Preparing The Installation2.1
Before mounting the MOBOTIX Q24M, the following questions should be answered:
Where will the camera be mounted?1.
Mounting to a ceiling or wall; section 2.1.1. and 2.1.2
Which other mounting options are available?2.
On-wall mounting, in-ceiling mounting, vandalism protection, wall mounting, pole
mounting, see section 2.1.3
How is the camera connected to network and how is power supplied?3.
MX-NPA-PoE or other PoE components (IEEE 802.3af), see section 2.1.4
How are the connections furnished from the building?4.
Wall outlets, see section 2.1.5
What cabling considerations are necessary?5.
Wiring, see section 2.1.6 and 2.11
The following sections contain a brief answer to each of these questions, as well as refer-
ences to the relevant sections in this manual. For more information on the MOBOTIX Q24M
and available accessories, please see: www.mobotix.com
Wall installation with
On-Wall Set 10°