Specifications

4/1�61�6
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Q24M Camera Manual: Contents
2.6 Mounting The Camera With The In-Ceiling Set 72
2.6.1 Mounting Instructions 72
2.6.2 In-Ceiling Set 73
2.6.3 Procedure 76
2.7 Installing The Vandalism Set 78
2.7.1 Mounting Instructions 78
2.7.2 Vandalism Set 79
2.7.3 Procedure 82
2.8 Installing The Wall Mount 84
2.8.1 Mounting Instructions 84
2.8.2 Wall Mount 85
2.8.3 Procedure 88
2.9 Installing The Corner And Pole Mount 90
2.9.1 Mounting Instructions 90
2.9.2 Corner And Pole Mount 91
2.9.3 Mounting To A Pole 93
2.9.4 Mounting To A Wall Or Building Corner 94
2.9.5 Mounting The Wall Mount To The Corner And Pole Mount 95
2.10 Replacing The MicroSD Card 96
2.10.1 Removing The MicroSD Card 96
2.10.2 Inserting A MicroSD Card 97
2.11 Network And Power Connection 98
2.11.1 Notes On Cable Lengths And Power Supply 98
2.11.2 PoE Variables 98
2.11.3 Power Supply Using A Switch 99
2.11.4 Power Supply When Connected Directly To A Computer 100
2.11.5 Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products 100
2.11.6 Camera Startup Sequence 101
3 OPERATING THE CAMERA 102
3.1 Manual And Automatic Operation - Overview 102
3.1.1 Manually Using A Computer In The 10.X.X.X IP Address Range 103
3.1.2 Automatically Using MxControlCenter Or MxEasy 104
3.1.3 Automatically Using DHCP 105
3.2 First Images And The Most Important Settings 106
3.2.1 Manually Setting Up The Network Parameters In A Browser 106
3.2.2 First Images And Configuration In The Browser 108
3.2.3 First Images And Network Parameter Configuration In MxControlCenter 110
3.2.4 First Images And Network Parameter Configuration In MxEasy 116
3.2.5 Starting The Camera With An Automatic IP Address (DHCP) 120
3.2.6 Starting The Camera With The Factory IP Address 121