Specifications

147/1�6
Additional Notes
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Starting The Camera With The Factory IP Address3.7.4
If the camera's IP address is not known, you can start the camera with its factory IP
address. Section 3.2.6, Starting the Camera with the Factory IP Address , describes this
procedure in more detail.
Reset The Camera To Factory Settings3.7.�
All settings of the MOBOTIX camera can be permanently reset to the factory default settings.
This makes sense if, for example, you have obtained a camera without any information
or you would like to reset all settings after testing the camera. In order to perform this
procedure, you need to have access to the administration area of the camera (admins
group). Open Admin Menu > Reset to reset the camera to factory defaults.
Note: All defined users will be deleted and the admin password will be reset to the factory
default when you reset the camera using Admin Menu > Reset. If you want to maintain
existing users, use the method described in section 3.2.6, Starting the Camera with the
Factory IP Address .
Activate Event Control And Motion Detection3.7.6
In its default configuration, the camera's event control and video motion detection features
are not enabled. In order to activate event-controlled recording, open Setup Menu >
General Event Settings and activate the Arming switch. Another method is to click the
Arm & Record softbutton in the browser's user interface. The camera displays the video
motion detection window in the live image (dotted frame in the center) and the camera
automatically stores images as soon as the video motion window detects movements.
Deactivate Text And Logo Options3.7.7
As the camera arming is deactivated in its default configuration (see preceding section),
the MOBOTIX camera only displays the Text WWW.MOBOTIX.COM, the time stamp and
the MOBOTIX logo at the top of the image. Once the camera arming has been activated,
the text at the bottom of the live image (event, action, messaging and recording symbols)
will also appear.
You can deactivate the status bar at the bottom of the live image and the text bar in the top
left corner by setting Text Display in the Setup Menu > Text & Display Settings dialog to Off .
Setting Text Display to Date & Time will only display the time stamp in the live image.
To hide the logo in the live image, open Admin Menu > Logo Proles and set Logo
Display to Disable .
You can reset specific
parts of the configuration
If the dotted rectangle in
the live image is visible,
the camera is armed
Text and logos can be also
deactivated or customized