Specifications

139/1�6
MicroSD Card Recording
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Caution
A MicroSD card may only be removed from the camera after you have deactivated
Recording to MicroSD Card and rebooted the camera. Failing to do so may lead
to data loss!
Removing connected flash storage devices from the camera without properly deac-
tivating them may lead to data loss and/or destroy certain areas of the storage
device. Due to MxFFS formatting, this is limited to 4 MB of lost data per incident. A
FAT-formatted device could lose all its data if the device was removed before being
deactivated!
Using A MicroSD Card In A Different MOBOTIX Camera3.4.6
A MicroSD card containing recorded video data from a MOBOTIX camera can be inserted
into any MicroSD card-enabled MOBOTIX camera. Once MicroSD card recording has been
activated (requires a reboot), the "new" MOBOTIX camera automatically synchronizes
with the card and resumes recording. Note that no data is lost in this process. Make
sure that you deactivate MicroSD card recording before removing the card and reboot
the MOBOTIX camera!
If the MicroSD card's contents are encrypted, you need to enter the correct password in
the "new" camera in the Admin Menu > Storage on External File Server / Flash Device
dialog. Otherwise, the camera cannot access the MicroSD card.
Limitations On Warranty When Using Flash Storage Devices3.4.7
MOBOTIX will not assume any responsibility for Flash storage devices (e.g. MicroSD cards
or connected USB storage devices) delivered with or integrated into MOBOTIX cameras.
The same applies to damage to Flash storage devices or damage resulting from the use
of devices that the customer did not buy from MOBOTIX.