Specifications

127/1�6
Virtual PTZ And Special Q24M Conguration
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Use the Q24M On Screen Control:
You can set the On Screen Control by clicking the individual areas (panning, tilting, zoom-
ing, correcting the panorama) in two different directions with the mouse.
Each area is represented by a horizontal or vertical bar with a central point. The further
away from this central point that you move the mouse, the greater the change trig-
gered. Clicking the central point of the cross leads directly to the default setting of the
On Screen Control.
During panorama correction, clicking between the two trapezoid symbols straightens the
left or right tilting lines, which are best visible at the edges of the image section.
TILT (DOWN)
PANORAMA CORRECTIONINITIAL VALUE
ZOOM
DEFAULT SETTINGS
(ONSCREEN CONTROL)
PAN (RIGHT)
PAN (LEFT)
TILT (UP)
Bring columns together
at the top (neces-
sary to correct the
example on the left)
Bring columns together
at the bottom