Specifications

12�/1�6
Virtual PTZ And Special Q24M Conguration
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Wall Mount: Setting And Correcting The Standard View "Panorama"
In the Quick Control 1. "Display Mode", select the option "Panorama". Examine the
image which is now displayed. If the section meets your expectations, no further
adjustment is necessary, and panorama configuraion is complete. To change the
image section to meet your specific expectations, continue with step 2.
Note
The currently visible image section may differ from the desired image section due to
e.g. the installation position or any accessories in use. However, it is not necessary to
physically move the camera, as in this case the browser alone can be used to adjust
the visible panorama image by zooming, panning and tilting. Tilted vertical lines may
also be optically straightened to the image edges using the panorama correction
function. These tilted lines are primarily caused if the camera itself is tilted (camera
installed with 10° On-Wall Set) or if the image tilt has been modified.
High-resolution 180° Panorama
High-resolution 180° Panorama
Camera live image with
panorama correction
Camera live image
without panorama
correction with
QuickControls visible