Specifications

106/1�6
Q24M Camera Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
First Images And The Most Important Settings3.2
Once the camera has been connected to the network, you need to set up the camera's network
interface accordingly. This step involves setting up and checking the network parameters of
the camera. If your network is already using an IP address in the 10.x.x.x range with a
255.0.0.0 network mask, you do not need to change the camera's network parameters.
You can access the camera directly (see section 3.2.2). If your network or computer does
not use an IP address in the 10.x.x.x range (e.g. in the 192 or 172 ranges), you should follow
one of the following methods for changing the camera's network parameters:
Manual Setup (Section 3.2.1)
Automatic Setup using MxControlCenter or MxEasy (Sections 3.2.3 and 3.2.4)
Notes
For the following examples, we will use a camera with the factory address 10.8.0.99.
Replace this IP address with the IP address of your camera. You will find the IP
address of your camera on a small sticker on the camera. Make sure that the IP
addresses used in the following examples are not already being used by other
devices in the network.
Hint: Pressing the "R" key on the camera (see section 2.2.2) prompts the camera
to announce its current IP address over the speaker.
Manually Setting Up The Network Parameters In A Browser3.2.1
In order to manually set up the network parameters of the MOBOTIX camera, you need
a computer that is using a 10.x.x.x IP address. For this purpose, the computer's network
parameters usually have to be changed.
1. Change The Network Parameters Of Your Computer:
Windows (2000, XP and Vista):
Open 1.
Start > Settings > Control Panel > Network
Connections
. Clicking Properties opens the dialog
shown.
Double-click
2.
In t er ne t Proto co l ( TC P/IP). On the General
tab, activate the
Us e t h e following IP address
optio n.
Enter an IP address in the 10.x.x.x range in this field
(e.g. 10.8.0.11 ).
On ce al l dialogs h ave b een clos ed3. , the computer will
have the IP address 10.8.0.11.
Caution: Netmask 255.0.0.0