Specifications

100/1�61�6
Q24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Power Supply When Connected Directly To A Computer2.11.4
Connect the factory pre-installed cable of the camera to the 1. Camera connector of
the Network Power Adapter.
Connect the 2. PC/Power connector of the Network Power Adapter to the Ethernet
port of the computer.
Plug the RJ45 connector of the external power unit into the 3. LAN/Power connector
on the Network Power Adapter.
Power Supply (PoE IEEE 802.3af) Using Power-over-Ethernet Products2.11.�
Connect the factory pre-installed cable of the camera to the Ethernet connector of the PoE
switch/router. The switch/router must support the PoE standard IEEE 802.3af.
For the Q24M, you
should use the new
blue MX-NPA-PoE Set
- previous MOBOTIX
network power acces-
sories such as the NPA
Set, Power Box and
Power Rack (MX-NPA-
Set, MX-NPR-4 and
MX-NPR8/20) are
not suitable for use
with the Q24M
IP addresses in the
diagram are shown
only as an example
IP addresses in the
diagram are shown
only as an example