Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
The In-Ceiling Set oers the most stylish installation option for the D24M. When properly
The In-Ceiling Set oers the most stylish installation option for the D24M. When properly
installed, the only visible component is a particularly sleek and discreet dome camera,
installed, the only visible component is a particularly sleek and discreet dome camera,
while most of the remaining components are concealed inside the ceiling. Only the compact
while most of the remaining components are concealed inside the ceiling. Only the compact
dome and the thin decorative ring that conceals the screws can be seen.
dome and the thin decorative ring that conceals the screws can be seen.
For these reasons, the D24M installed with the In-Ceiling Set is the preferred option for
For these reasons, the D24M installed with the In-Ceiling Set is the preferred option for
most indoor spaces frequented by customers or the general public (e.g. hotels, restaurants,
most indoor spaces frequented by customers or the general public (e.g. hotels, restaurants,
banks, retail stores, public buildings, etc.).
banks, retail stores, public buildings, etc.).
The common use of suspended ceilings in commercial and public buildings is an additional
reason to place a preference on in-ceiling installation. The installation process is also
simplified, as the network cable may be laid without diculty and only a 15 cm diameter
hole must be cut in the ceiling or ceiling component.
Before installing the MOBOTIX D24M (IT/Secure) on an indoor ceiling with the In-Ceiling
Set, you must prepare the network connection and drill a hole for the camera:
•
: The network cable is fed through the ceiling directly above
the camera. When preparing the installation, make sure that about 15cm of cable
remains unused.
•
: The hole should have a
(see drilling
template at the end of the manual).
The white decorative
ring is also available
in stainless steel