Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
(MX-OPT-IC)
For simple installation in false ceiling tiles.
Suitable for discreet surveillance. Optionally
available with a stainless steel ring.
(MX-OPT-WH)
Consists of Outdoor Wall Mount and mounting
supplies. Covers RJ45 flush-mounted sockets.
Space for expansion modules (battery, UMTS,
WLAN, etc.). Easily mounted to poles using
Pole Mount. Weatherproof IP65.
(MX-OPT-MH)
Flange for Outdoor Wall Mount. Can be
mounted to wall corners or poles. 3 mm
stainless steel, white. Wall Mount may be
ordered separately or as a set.
Tinted Dome (MX-D24M-OPT-DCS)
Suitable for especially bright environments (e.g.
under direct sunlight). A tinted dome reduces
the glare from sunlight by 50% compared
with the standard dome.
(MX-NPA-PoE-Set*)
The Network Power Adapter Set is used to
remotely power the MOBOTIX D24M over
a network cable. This makes it possible to
use the network cable to both connect the
camera and remotely supply power (up to
100m). The MOBOTIX Network Power Adapter
Set including a power supply with RJ45 con-
nector is required if you are not using a PoE-
compatible switch or router to supply power
to the MOBOTIX camera.
Also suitable for
mounting to drywall
* Country-specic ver-
sions of the set are
available from MOBOTIX