Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
(MX-OPT-AP)
The On-Wall Set can reliably protect external cables if the cables cannot
be fed in the center below the camera housing. The On-Wall Mount
also provides ample space for extra modules.
(MX-OPT-AP-10DEG)
This On-Wall Set is identical to the regular On-Wall Set, except that the
mounted camera is inclined by 10 degrees. The inclination makes it
possible for the camera to deliver the best images even in demand-
ing situations.
(MX-OPT-IC)
The In-Ceiling Set allows the D24M camera to be installed in suspended
ceilings, for example. This type of installation provides optimal protec-
tion for the camera and reduces the visible profile to a minimum since
only the dome remains visible.
(MX-D24M-Vandal)
The Vandalism Set provides added protection for D24M cameras. The
set consists of a robust stainless steel cover (matt or polished) and
an impact-resistant polycarbonate dome. A camera equipped with
the Vandalism Set is perfectly suited for applications in demanding
environments (such as prisons, trouble areas, train stations, etc.).
(MX-OPT-WH)
The Wall Mount is the ideal solution for mounting the D24M to walls for
indoor and outdoor applications. The camera is completely dust-proof
and resistant to water jets (IP65). The Wall Mount also covers RJ45
flush-mounted sockets and has ample space for additional modules.
(MX-OPT-MH)
The MOBOTIX Corner and Pole Mount is the ideal choice when mount-
ing the MOBOTIX D24M to a pole or building corner. This mount can
only be used in conjunction with the Wall Mount. For poles with a
diameter ranging from 60to180mm.
On-Wall Set (IP65, for
outdoor applications)
10° On-Wall Set (IP65,
for outdoor applications)
Discreet in-ceiling
installation; decorative
outer ring also avail-
able in stainless steel
Vandalism Set (IP65)
Wall Mount made from
sturdy PBT-30GF (IP65)
Outdoor Corner and Pole
Mount made from stain-
less steel (in conjunc-
tion with Wall Mount)