Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
You can change the lens in the D24M camera models on site whenever necessary. Each
lens is secured by a lock ring. Each camera has a factory-aligned and quality-tested lens,
which makes on-site camera focusing unnecessary in most cases. The D24M cameras
are available for delivery with a lens of your choosing or no lens at all.
The image area captured by the D24M varies depending on the selected lens (see Section
1.4). With a Super Wide Angle lens (L22 with 90°), for example, almost an entire room can
be recorded from just one corner.
With an L135 Telephoto lens, a D24M camera with a high-resolution 3.1 megapixel sensor
is capable of clearly recording a license plate number from a distance of 75 meters. Or
even the serial number of a 5 euro bill from a distance of two meters!
With a D24M equipped
with an L22 lens, the
(slightly) distorted
image can be cor-
rected by software
(see Section 3.4)