Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
To configure this feature, open the dialog and
activate or deactivate the .
Notes
If you are using Full Image Recording on D24M
cameras, you should use at least MEGA resolution when storing. This will facilitate later
searches in MxControlCenter or . The advanced distortion correction features
require this function to deliver satisfactory image quality.
Due to its increased computing power, full image record-
ing reduces the data rate of the live image stream, which may drop by about 10 to 30
percent. It is therefore recommended to reduce the image rate for storage as much as
possible, so as to aect the live image stream as little as possible.
The event that triggered a video motion (VideoMotion VM)
window may not be in the recorded sequences as the window was not displayed at
the time.