Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
The virtual PTZ function allows you to use a mouse or joystick to continuously zoom in on
images from the selected video source and "virtually" move the enlarged image
section within the entire image sensor area.
The vPTZ function of the D24M can be controlled in the browser using the mouse. By
clicking any position on the image displayed on the monitor, this position becomes the
new image center. The image moves and is corrected accordingly. The can
be used to control the zoom function. This functionality is disabled in the default settings
of the camera and must therefore first be activated. To do so, go to
and uncheck the item. Then save the settings by
clicking and Close. You can now use the scroll wheel to zoom + (roll upwards) or
zoom - (roll downwards).
USB joystick offers
greater ease of use