Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
The camera can automatically obtain its network parameters using DHCP. This requires the
network to have a functioning DHCP server (e.g. a DSL router with activated DHCP server)
and the camera must be booted using DHCP (see Section 3.2.5
Starting the Camera With
an Automatic IP Address (DHCP)
). The IP address automatically assigned by the DHCP
server can be announced via the speaker of an activated ExtIO that is connected to the
D24M as soon as the camera has booted successfully.
• You can connect the camera directly to the target network.
• Network parameters are automatically assigned.
• No additional software is required.
• You do not need to access the camera user interface.
• The camera needs to be physically accessible as you need to press a key on the
camera housing to boot it using DHCP.
• Requires a running DHCP server on the network.
• The IP address must be determined by the administrator.
The ExtIO module
is available from the
MOBOTIX acces-
sories program