Manual
Table Of Contents
- Added Security Value
- Cost Benefits And Technical Advantages
- 2 INSTALLATION
- 3 OPERATING THE CAMERA
- 3.1 Manual And Automatic Operation - Overview
- 3.2 First Images And The Most Important Settings
- 3.3 Virtual PTZ
- 3.4 Correction Of Lens Distortion (L22 Only)
- 3.8 Additional Notes
- 3.8.1 Weatherproof Qualities
- 3.8.2 Password For The Administration Menu
- 3.8.3 Starting The Camera With The Factory IP Address
- 3.8.4 Reset The Camera To Factory Settings
- 3.8.5 Activate Event Control And Motion Detection
- 3.8.6 Deactivate Text And Logo Options
- 3.8.7 Deactivating The Daily Automatic Camera Reboot
- 3.8.8 Browser
- 3.8.9 Cleaning The Camera And Lens
- 3.8.10 Safety Warnings
www.mobotix.com • sales@mobotix.com
You can set up the camera's network parameters using the free of charge video manage-
ment software MxControlCenter or MxEasy (see Sections 3.2.3 and 3.2.4). You can also
use one of these applications to automatically configure the network parameters of MOBOTIX
cameras that are not operating on the same IP address range as the computer.
•
Y
ou can connect the camera directly to the target network.
You can connect the camera directly to the target network.Y
•
The camera does not need to be physically accessible, i.e. it can remain mounted
to a pole, for example.
•
The
camera can be configured to automatically receive an IP address (optional).
•
The network parameters can be manually set (optional).
•
Y
ou do not need to access the camera user interface.
You do not need to access the camera user interface.Y
•
The MxControlCenter or MxEasy video management software needs to be installed
on the computer.
MxControlCenter soft-
ware (free download
from www.mobotix.com)
MxEasy (free download
from www.mobotix.com)
ou can connect the camera directly to the target network.
The camera does not need to be physically accessible, i.e. it can remain mounted
to a pole, for example.
camera can be configured to automatically receive an IP address (optional).
The network parameters can be manually set (optional).
ou do not need to access the camera user interface.
The MxControlCenter or MxEasy video management software needs to be installed
ou can connect the camera directly to the target network.
The camera does not need to be physically accessible, i.e. it can remain mounted
to a pole, for example.
camera can be configured to automatically receive an IP address (optional).
The network parameters can be manually set (optional).
ou do not need to access the camera user interface.
The MxControlCenter or MxEasy video management software needs to be installed