Specifications

67/136
Mounting the Camera with Ceiling Mount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.3 Mounting the Camera with Ceiling Mount
The M25M is an allround camera designed for use in indoor and outdoor applications. The
camera is always installed together with the VarioFlex mount, which has been prepared at
the factory for wall mounting and can be converted to a ceiling mount with just few single
touches. The best camera position for the selected lens must be found before mounting the
camera to a ceiling, or to an overhang or balcony (see Section 2.1.1, «Mounting Options:
Wall, Ceiling, Pole»
and Section 2.1.2, «Mounting with Hemispheric Lens L12» ). Once the
camera has been mounted to the wall, you can fine-tune its position. Please also read
the notes on protecting the camera against condensation (see
Section 3.6.1 ).
2.3.1 VarioFlex Ceiling Mount
Using the VarioFlex Ceiling Mount, the camera can be precisely panned, both horizontally
and vertically, to suit the area that is to be monitored.
When mounted to a ceiling, the camera can be turned or tilted as follows:
• horizontally: 360°
• vertically: 110°
See Section 3.6.1,
«Protecting the Camera
Against Condensation»
Turning/tilting mounted
to ceiling:
• horizontally: 360°
• vertically: 110°
360°
–90°
+20°