Specifications

72/146
M24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.5.3 Required Tools
Please first check that all components supplied with the camera are present in the original
packaging (see Section 2.2).
The following additional tools are required for installation:
• Screwdriver
• Power drill for screw anchor holes
• MOBOTIX drilling templates (at the end of this manual)
• Scissors to cut out the template
• Pen to mark the drill holes
• Materials and any tools needed to connect the pre-installed MOBOTIX network cable
in the camera with the on-site network cable
Caution
Never use screws with recessed heads to install the VarioFlex mount as these
screws will destroy the mount.