Specifications

65/146
Mounting The Camera With Wall Mount
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
In order to ensure a flush finish with the surface, connect the camera patch cable to the
network cable using a standard adapter that is protected in the wall mount or install a
ush-mounted socket with RJ45 connector. When doing so, make sure that the flush-
mounted socket is placed as high up in the wall mount housing as possible.
When installing on-wall cabling, breaking out one of the four possible openings in the
base of the wall mount will ensure that the cables can be fed neatly into the camera.
Caution: If using the camera outdoors, only use the opening at the bottom of the
mount for guiding the cables through. The connection to the camera patch cable can
be established using a suitable adapter within the wall mount.
Washer Flush-mounted socket Mount
Camera patch cable
Standard adapter for
cable connection
Additional sealing of
the wall mount with
silicone (on the washer)
is recommended for use
with uneven surfaces
Pliers to
break through a
cable guide