Specifications

136/146
M24M Camera Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
3.9.10 Cleaning The Camera And Lens
If the lens becomes dirty during the installation process, clean the lens using a lint-free cotton
cloth. Make sure that the lens is still in focus after cleaning and adjust its focus if required.
Cleaning The Lens Cover:
• In order to protect the lens cover from being scratched and from
getting dirty, only handle it using a soft cotton cloth.
• You should clean the lens cover at regular intervals. Always use
a soft, lint-free cotton cloth for this purpose.
• If the dirt is more persistent, add a mild alcohol-free detergent
without abrasive particles.
• Make sure you instruct cleaning personnel on how to clean the camera.
3.9.11 Safety Warnings
Electrical surges can be induced by other electrical appliances, improper wiring, but also
from the outside (for example, lightning strikes to phone or power lines).
MOBOTIX cameras are protected against the eects of small electrical surges by a range
of measures. These measures, however, cannot prevent the camera from being damaged
when stronger electrical surges occur. Particular care should be taken when installing the
camera outside to ensure proper protection against lightning, as this also protects the
building and the entire network infrastructure.
MOBOTIX recommends having MOBOTIX cameras installed only by specialists accustomed
to installing network devices and who have proper respect for the pertinent regulations
lightning protection and fire prevention, as well as the current technology for preventing
damages from electrical surges.
Due to the high computing power of the M24M and the corresponding environmental
conditions at the installation site, the temperature of the sensor board may rise to a
relatively high level. However, this does not aect the functionality of the camera. The lens
should not be touched directly during live operation.
.