Specifications

134/146
M24M Camera Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
3.9.3 Permanently Deactivating The Microphone
Deactivating a camera's microphone may become necessary in order to protect the privacy
of persons at a workplace or for other reasons. You can permanently and irreversibly
deactivate the microphone in the Admin Menu> Loudspeaker and Microphone dialog.
Caution
This deactivation is permanent and cannot be reversed even by MOBOTIX engi-
neers. Deactivating the microphone will also deactivate all features that use the
camera’s microphone.
3.9.4 Starting The Camera With The Factory IP Address
If the camera's IP address is not known, you can start the camera with its factory IP
address. Section 3.2.6 Starting the Camera with the Factory IP Address describes this
procedure in more detail.
3.9.5 Reset The Camera To Factory Settings
All settings of the MOBOTIX camera can be permanently reset to the factory default settings.
This makes sense if you have, for example, obtained a camera without any information
or you would like to reset all settings after testing the camera. In order to perform this
procedure, you need to have access to the Administration menu of the camera (admins
group). Open Admin Menu > Reset to reset the camera to factory defaults.
Note
All defined users will be deleted and the admin password will be reset to the factory
default when you reset the camera using Admin Menu > Reset. If you want to maintain
existing users, use the method described in Section 3.2.6 Starting the Camera with the
Factory IP Address ..
3.9.6 Activate Event Control And Motion Detection
In its default configuration, the camera's event control and video motion detection features
are not enabled. In order to activate event-controlled recording, open Setup Menu >
General Event Settings and activate the Arming switch. Another method is to click the
Arm & Record soft key in the browser's user interface. The camera displays the video
motion detection window in the live image (dotted frame in the center) and the camera
automatically stores images as soon as the video motion window detects movements.
The microphone can be
irreversibly deactivated!
The conguration
can also be reset
partially
If the dotted
rectangle in the live
image is visible, the
camera is armed