Specifications

133/146
Additional Notes
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Depending on the later tilt of the camera, drill through the front or rear drain hole of the
camera’s weatherproof housing.
When cleaning the camera with a water jet, do not use high-pressure cleaners. The drain
holes should be sealed with adhesive tape during cleaning.
3.9.2 Password For The Administration Menu
Accessing the Administration menu of the camera (Admin Menu soft key) is only possible
after entering a user name and password.
• Factory default user name is admin
• Factory default password is meinsm
The Quick Installation assistant automatically appears when the Administration menu is
accessed for the first time. It provides an easy method to adjust the basic camera settings
to the current application scenario. For security reasons, it is highly recommended to
change the default administrator password after the camera has been properly configured.
Enter the user name and password exactly as shown above. Note that all entries are
case-sensitive.
Caution
Make sure that you store information on user names and passwords in a secure
place. If you lose the administrator password and cannot access the Administration
menu, the password can only be reset at the factory. This service is subject to a
service charge!
Camera tilted
upwards: Drill
through rear
drain hole
Camera tilted
downwards: Drill
through front
drain hole
TILT (UP)
TILT (DOWN)