Specifications

130/146
M24M Camera Manual: OPERATING THE CAMERA
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
• Activate event control and recording: By factory default, the MOBOTIX camera's
event control is disabled. Click on the Arm & Record button to activate event control.
This will activate video motion detection and recording. Cameras with integrated
flash memory (MOBOTIX R models and models with SD card) will use the flash
memory by default to store the image and video data (recording target). If desired,
you can set additional events and adjust the settings of the recording and storage
parameters (Setup Menu> Event Settings, Setup Menu> Recording and Admin
Menu> Recording to External File Server/ Flash Device).
=> ( Software Camera Manual Part 2 , Chapter 7 and Chapter 8)
• Set up actions/messaging: Upon detecting an event, the MOBOTIX camera can trigger
alarms. These alarms can be adjusted to your needs and you can assign them to
one or more events: playing back an alarm sound on the camera speaker, showing
the visual alarm in the camera live image, sending an e-mail or network message
with the alarm image, placing a phone call, uploading an alarm image to an FTP
server, switching a signal output line of the camera (for example, for switching on the
lights/opening a door). To change the corresponding settings, refer to the following
dialogs: Setup Menu> Actions, Setup Menu> Messaging and Messaging2 and
Setup Menu> Enhanced Signal Out Options.
=> ( Software Camera Manual Part 2 , Chapter 7)