Specifications

117/146
Special Hemispheric Conguration In The Browser (L11 Only)
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
Using The M24M OnScreen Control:
You can set the OnScreen Control by clicking the individual areas (panning, tilting, zooming,
panorama and horizon correction) in two dierent directions with the mouse. Each area
is represented by a horizontal or vertical bar with a central point. The further away from
this central point that you move the mouse, the greater the change triggered. Clicking
the central point of the cross leads directly to the default setting of the OnScreen Control.
The horizon correction feature causes the entire image to rotate between the range of
-30° to +30° and should, if required, be used before panorama correction.
During panorama correction, clicking between the two trapezoid symbols straightens
the left or right tilting vertical lines, which are best visible at the edges of the image
section.
PANORAMA CORRECTIONINITIAL VALUE
TILT (UP)
PAN (LEFT)
TILT (DOWN)
DEFAULT SETTINGS
(ONSCREEN CONTROL)
PAN (RIGHT)
ZOOM
HORIZON CORRECTION (-30° ... +30°)
Bring columns together
at the top (necessary
to correct the example
on the left); weather-
proof cover is removed
from the image
Bring columns together
at the bottom
PANORAMA
CORRECTION
Rotate image up to -30°
Rotate image up to +30°
HORIZON CORRECTION