Specifications

85/146
Replacing The MicroSD Card
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
To use the camera without a MicroSD card, continue with step2 in Section2.8.2 (Mount
the Back Plate).
2.8.2 Inserting The MicroSD Card
1. Insert the MicroSD card: Push the MicroSD card into the
card slot as shown, until an audible and perceptible click
indicates it is in place.
2. Mount the back plate: Replace the back plate of the
camera housing, ensuring that the back plate screw
holes are correctly positioned above the thread inserts.
3. Screw the back plate tight and replace the connection
cables: Place the four Allen screws back into the back
plate and tighten the screws using the supplied 2.5
mm Allen wrench. The previously removed patch cable
must now be reconnected (see end of Section 2.2.2).
4. Tighten the back plate: Re-attach the camera to the
weatherproof housing using the two lock screws. Make
sure that none of the cables are damaged in the process.
5. Activate recording: If you have inserted a MicroSD card that has already been
MxFFS formatted, you can activate recording under Admin Menu > Storage on
External File Server / Flash Device. Once the camera has been rebooted, it auto-
matically activates recording.
6. If you have inserted a new MicroSD card, it must first be formatted as described
in Section3.6 MicroSD Card Recording.
Push-push function:
insert the MicroSD
card and push it gently
Bayonet catch
closed