Specifications

64/146
M24M Camera Manual: INSTALLATION
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • [e-mail]
2.4 Mounting The Camera With Wall Mount
2.4.1 Mounting Instructions
The M24M is an allround camera designed for use in indoor and outdoor applications.
The camera must always be installed with the VarioFlex mount, which has been prepared
at the factory for wall mounting and allows the cabling to be concealed. The best camera
position for the selected lens must be found before mounting the camera to the wall (see
Sections 1.2 and 1.5). Once the camera has been mounted to the wall, you can fine-tune
its position. Please read the notes on protecting the camera against condensation
(see Section 3.9.1).
2.4.2 VarioFlex Wall Mount
Using the VarioFlex Wall Mount, the camera can be precisely panned, both horizontally
and vertically, to suit the area that is to be monitored.
When mounted to a wall, the camera can be turned or tilted as follows:
• horizontally: 180°
• vertically: 110°
See Section 3.9.1
-90°
+20°
180°